Rat VEGFR1 / Flt-1 ELISA Kit
- SKU:
- RTFI00063
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P53767
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich ELISA, Double Antibody
- Synonyms:
- Flt1, VEGFR1, FLT1, Flt-1, FLT, FLT-1, Fms-like tyrosine kinase 1, fms-related tyrosine kinase 1, vascular endothelial growth factor, vascularpermeability factor receptor, FRT, Tyrosine-protein kinase FRT, Tyrosine-protein kinase receptor FLT, vascul
- Reactivity:
- Rat
Description
| 商品名: | Rat Flt1/VEGFR1 (Vascular endothelial growth factor receptor 1) ELISA Kit |
| 製品コード: | RTFI00063 |
| サイズ: | 96 Assays |
| 目標: | Rat Flt1/VEGFR1 |
| エイリアス: | Flt1, VEGFR1, FLT1, Flt-1, FLT, FLT-1, Fms-like tyrosine kinase 1, fms-related tyrosine kinase 1, vascular endothelial growth factor, vascularpermeability factor receptor, FRT, Tyrosine-protein kinase FRT, Tyrosine-protein kinase receptor FLT, vascular endothelial growth factor receptor 1, Vascular permeability factor receptor, VEGFR1, VEGFR-1 |
| 反応性: | Rat |
| 検出方法: | Sandwich ELISA, Double Antibody |
| 感度: | 0.094ng/ml |
| 範囲: | 0.156-10ng/ml |
| 保管所: | 4°C for 6 months |
| ノート: | For Research Use Only |
| 回復: | Matrices listed below were spiked with certain level of Rat Flt1/VEGFR1 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Flt1/VEGFR1 in samples. | ||||||||||||||||
| |||||||||||||||||
| 直線性: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Flt1/VEGFR1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| Intra-Assay: | CV <8% | ||||||||||||||||
| Inter-Assay: | CV <10% |
| Uniprot: | P53767 |
| UniProt Protein Function: | VEGFR1: a receptor tyrosine kinase of the VEGFR family. Receptor for VEGF, VEGFB and PGF. The VEGF-kinase ligand/receptor signaling system plays a key role in vascular development and regulation of vascular permeability. Two splice variant isoforms have been described. Isoform SFlt1 may have an inhibitory role in angiogenesis. |
| UniProt Protein Details: | Protein type:Protein kinase, tyrosine (receptor); Membrane protein, integral; Protein kinase, TK; EC 2.7.10.1; Kinase, protein; TK group; VEGFR family Cellular Component: focal adhesion; integral to plasma membrane; plasma membrane; receptor complex; endosome Molecular Function:vascular endothelial growth factor receptor activity; identical protein binding; growth factor binding; transmembrane receptor protein tyrosine kinase activity; receptor signaling protein tyrosine kinase activity; ATP binding Biological Process: peptidyl-tyrosine phosphorylation; activation of MAPKK activity; protein amino acid autophosphorylation; positive regulation of smooth muscle cell proliferation; chemotaxis; protein amino acid phosphorylation; positive regulation of vascular endothelial growth factor receptor signaling pathway; positive regulation of MAP kinase activity; monocyte chemotaxis; positive regulation of fibroblast proliferation; positive regulation of cell proliferation; angiogenesis; embryonic morphogenesis; cell differentiation; regulation of smooth muscle contraction; cell migration; intracellular receptor-mediated signaling pathway; positive regulation of phosphoinositide 3-kinase activity; patterning of blood vessels; positive regulation of phosphoinositide 3-kinase cascade; positive regulation of angiogenesis; response to hypoxia; blood vessel morphogenesis; sprouting angiogenesis; vascular endothelial growth factor receptor signaling pathway; transmembrane receptor protein tyrosine kinase signaling pathway; positive regulation of cell migration |
| NCBI Summary: | tyrosine kinase receptor for vascular endothelial growth factor; may play a role in cell proliferation and cell survival [RGD, Feb 2006] |
| UniProt Code: | P53767 |
| NCBI GenInfo Identifier: | 1718161 |
| NCBI Gene ID: | 54251 |
| NCBI Accession: | P53767.1 |
| UniProt Related Accession: | P53767 |
| Molecular Weight: | 150,250 Da |
| NCBI Full Name: | Vascular endothelial growth factor receptor 1 |
| NCBI Synonym Full Names: | FMS-related tyrosine kinase 1 |
| NCBI Official Symbol: | Flt1 |
| NCBI Official Synonym Symbols: | VEGFR-1 |
| NCBI Protein Information: | vascular endothelial growth factor receptor 1; FLT-1; FMS-like tyrosine kinase 1; tyrosine-protein kinase receptor FLT; vascular endothelial growth factor receptor-1; Fms-related tyrosine kinase 1 (vascular endothelial growth factor/vascular permeability factor receptor) |
| UniProt Protein Name: | Vascular endothelial growth factor receptor 1 |
| UniProt Synonym Protein Names: | Fms-like tyrosine kinase 1; FLT-1; Tyrosine-protein kinase receptor FLT |
| Protein Family: | Vascular endothelial growth factor receptor |
| UniProt Gene Name: | Flt1 |
| UniProt Entry Name: | VGFR1_RAT |
| ステップ | プロトコル |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37°C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
ELISAアッセイを実施する場合、可能な限り最良の結果を達成するためにサンプルを準備することが重要です。以下に、さまざまなサンプルタイプのサンプルを準備するための手順のリストを示します。
| サンプルタイプ | プロトコル |
| 血清 | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles. |
| プラズマ | Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit. |
| 尿および脳脊髄液 | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| 細胞培養上清 | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| 細胞溶解物 | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
| 組織ホモジネート | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C. |
| 組織溶解物 | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| 母乳 | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Rat Methylmalonic Acid (MMA) ELISA Kit
