Rat SLC25A4 / Adenine Nucleotide Translocase 1 ELISA Kit

(No reviews yet) Write a Review
お見積り依頼
SKU:
RTFI00402
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
Q05962
Sensitivity:
0.094ng/ml
Range:
0.156-10ng/ml
ELISA Type:
Sandwich ELISA, Double Antibody
Synonyms:
Slc25a4, SLC25A4, ADP, ATP translocase 1, Solute carrier family 25 member 4, Adenine nucleotide translocator 1, ANT 1, ADP, ATP carrier protein 1, ADP, ATP carrier protein, heart, skeletal muscle isoform T1, T1, ANT, AAC1, PEO2, PEO3
Reactivity:
Rat
€0.00

Description

system_update_altデータシートsystem_update_alt安全性データシート
商品名:Rat Slc25a4 (ADP/ATP translocase 1) ELISA Kit
製品コード:RTFI00402
サイズ:96 Assays
目標:Rat Slc25a4
エイリアス:Slc25a4, SLC25A4, ADP, ATP translocase 1, Solute carrier family 25 member 4, Adenine nucleotide translocator 1, ANT 1, ADP, ATP carrier protein 1, ADP, ATP carrier protein, heart, skeletal muscle isoform T1, T1, ANT, AAC1, PEO2, PEO3
反応性:Rat
検出方法:Sandwich ELISA, Double Antibody
感度:0.094ng/ml
範囲:0.156-10ng/ml
保管所:4°C for 6 months
ノート:For Research Use Only
回復:Matrices listed below were spiked with certain level of Rat Slc25a4 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Slc25a4 in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)90-10196
EDTA plasma(n=5)93-10096
UFH plasma(n=5)87-9892
直線性:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Slc25a4 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)85-105%97-105%95-102%
EDTA plasma(n=5)83-101%85-100%83-96%
UFH plasma(n=5)86-99%81-99%81-97%
Intra-Assay:CV <8%
Inter-Assay:CV <10%
Uniprot:Q05962
UniProt Protein Function:SLC25A4: Catalyzes the exchange of cytoplasmic ADP with mitochondrial ATP across the mitochondrial inner membrane. Defects in SLC25A4 are a cause of progressive external ophthalmoplegia with mitochondrial DNA deletions autosomal dominant type 2 (PEOA2). Progressive external ophthalmoplegia is characterized by progressive weakness of ocular muscles and levator muscle of the upper eyelid. In a minority of cases, it is associated with skeletal myopathy, which predominantly involves axial or proximal muscles and which causes abnormal fatigability and even permanent muscle weakness. Ragged- red fibers and atrophy are found on muscle biopsy. A large proportion of chronic ophthalmoplegias are associated with other symptoms, leading to a multisystemic pattern of this disease. Additional symptoms are variable, and may include cataracts, hearing loss, sensory axonal neuropathy, ataxia, depression, hypogonadism, and parkinsonism. Belongs to the mitochondrial carrier family.
UniProt Protein Details:

Protein type:Transporter, SLC family; Membrane protein, multi-pass; Mitochondrial; Membrane protein, integral; Transporter

Cellular Component: mitochondrial outer membrane; mitochondrion; mitochondrial inner membrane; integral to membrane; nucleus; myelin sheath

Molecular Function:protein binding; enzyme binding; transporter activity

Biological Process: apoptotic mitochondrial changes; heart development; liver development; transmembrane transport; aging

NCBI Summary:This gene is a member of the mitochondrial carrier subfamily of solute carrier protein genes. The product of this gene functions as a gated pore that translocates ADP from the cytoplasm into the mitochondrial matrix and ATP from the mitochondrial matrix into the cytoplasm. The protein forms a homodimer embedded in the inner mitochondria membrane. Mutations in this gene have been shown to result in autosomal dominant progressive external opthalmoplegia and familial hypertrophic cardiomyopathy. [provided by RefSeq, Jun 2013]
UniProt Code:Q05962
NCBI GenInfo Identifier:55749577
NCBI Gene ID:291
NCBI Accession:NP_001142
UniProt Related Accession:P12235
Molecular Weight:33kDa
NCBI Full Name:ADP/ATP translocase 1
NCBI Synonym Full Names:solute carrier family 25 member 4
NCBI Official Symbol:SLC25A4  
NCBI Official Synonym Symbols:T1; ANT; AAC1; ANT1; PEO2; PEO3; ANT 1; PEOA2; MTDPS12; MTDPS12A  
NCBI Protein Information:ADP/ATP translocase 1
UniProt Protein Name:ADP/ATP translocase 1
UniProt Synonym Protein Names:ADP,ATP carrier protein 1; Adenine nucleotide translocator 1; ANT 1; Solute carrier family 25 member 4
Protein Family:ADP/ATP translocase
UniProt Gene Name:Slc25a4  
UniProt Entry Name:ADT1_RAT
ステッププロトコル
1. Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.Aliquot 0.1ml standard solutions into the standard wells.
3. Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4. Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.Seal the plate with a cover and incubate at 37°C for 90 min.
6. Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7. Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.Seal the plate with a cover and incubate at 37°C for 60 min.
9. Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10. Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11. Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12. Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13. Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14. Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

ELISAアッセイを実施する場合、可能な限り最良の結果を達成するためにサンプルを準備することが重要です。以下に、さまざまなサンプルタイプのサンプルを準備するための手順のリストを示します。

サンプルタイプ プロトコル
血清

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.

プラズマ Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
尿および脳脊髄液 Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
細胞培養上清 Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
細胞溶解物 Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
組織ホモジネート The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
組織溶解物 Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
母乳 Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.
View AllClose

View AllClose

Related Products