Human LIM homeobox transcription factor 1-beta / LMX1B ELISA Kit

(No reviews yet) Write a Review
SKU:
HUFI01239
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
O60663
Sensitivity:
0.188ng/ml
Range:
0.313-20ng/ml
ELISA Type:
Competitive ELISA, Coated with Antigen
Synonyms:
LMX1B, LIM homeobox transcription factor 1-beta, LMX-1.2, LIM, homeobox protein 1.2, LIM, homeobox protein LMX1B
Reactivity:
Human
€0.00
Frequently bought together:

Description

system_update_altデータシートsystem_update_alt安全性データシート
商品名:Human LIM homeobox transcription factor 1-beta / LMX1B ELISA Kit
製品コード:HUFI01239
サイズ:96T
エイリアス:LMX1B, LIM homeobox transcription factor 1-beta, LMX-1.2, LIM, homeobox protein 1.2, LIM, homeobox protein LMX1B
検出方法:Competitive ELISA, Coated with Antibody
申し込み:This immunoassay kit allows for the in vitro quantitative determination of Human LMX1B concentrations in serum plasma and other biological fluids.
感度:0.188ng/ml
範囲:0.313-20ng/ml
保管所:4°C for 6 months
ノート:For Research Use Only
回復:Matrices listed below were spiked with certain level of Human LMX1B and the recovery rates were calculated by comparing the measured value to the expected amount of Human LMX1B in samples.
MatrixRecovery range(%)Average(%)
serum(n=5)87-10392
EDTA plasma(n=5)89-10497
UFH plasma(n=5)86-10195
直線性:The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human LMX1B and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample1:21:41:8
serum(n=5)88-98%87-103%93-104%
EDTA plasma(n=5)83-101%82-98%87-98%
UFH plasma(n=5)85-91%82-100%81-98%
CV(%):Intra-Assay: CV<8%
Inter-Assay: CV<10%
成分量保管所
ELISA Microplate(Dismountable)8×12 strips4°C for 6 months
Lyophilized Standard24°C/-20°C
Sample/Standard Dilution Buffer20ml4°C
Biotin-labeled Antibody(Concentrated)60ul4°C (Protect from light)
Antibody Dilution Buffer10ml4°C
HRP-Streptavidin Conjugate(SABC)120ul4°C (Protect from light)
SABC Dilution Buffer10ml4°C
TMB Substrate10ml4°C (Protect from light)
Stop Solution10ml4°C
Wash Buffer(25X)30ml4°C
Plate Sealer5-

必要なその他の材料と設備:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipettetips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir
UniprotO60663
UniProt Protein Function:LMX1B: Essential for the specification of dorsal limb fate at both the zeugopodal and autopodal levels. Defects in LMX1B are the cause of nail-patella syndrome (NPS); also known as onychoosteodysplasia. NPS is a disease that cause abnormal skeletal patterning and renal dysplasia. 2 isoforms of the human protein are produced by alternative splicing.
UniProt Protein Details:Protein type:Cell development/differentiation; DNA-binding; Transcription factor

Chromosomal Location of Human Ortholog: 9q33.3

Cellular Component: nucleus

Molecular Function:protein binding; zinc ion binding; sequence-specific DNA binding; transcription factor activity

Biological Process: collagen fibril organization; transcription, DNA-dependent; in utero embryonic development; multicellular organismal development; neuron migration; cerebellum morphogenesis; limb morphogenesis; neuron differentiation; cell proliferation; organ growth; regulation of transcription, DNA-dependent; dorsal/ventral pattern formation; midbrain development; positive regulation of transcription from RNA polymerase II promoter; central nervous system neuron development

Disease: Nail-patella Syndrome

NCBI Summary:This gene encodes a member of LIM-homeodomain family of proteins containing two N-terminal zinc-binding LIM domains, 1 homeodomain, and a C-terminal glutamine-rich domain. It functions as a transcription factor, and is essential for the normal development of dorsal limb structures, the glomerular basement membrane, the anterior segment of the eye, and dopaminergic and serotonergic neurons. Mutations in this gene are associated with nail-patella syndrome. Alternatively spliced transcript variants encoding different isoforms have been found for this gene. [provided by RefSeq, Mar 2010]
UniProt Code:O60663
NCBI GenInfo Identifier:485956425
NCBI Gene ID:4010
NCBI Accession:O60663.3
UniProt Secondary Accession:O60663,O75463, Q5JU95, Q6ISC9, F8W7W6,
UniProt Related Accession:O60663
Molecular Weight:402
NCBI Full Name:LIM homeobox transcription factor 1-beta
NCBI Synonym Full Names:LIM homeobox transcription factor 1, beta
NCBI Official Symbol:LMX1B
NCBI Official Synonym Symbols:NPS1; LMX1.2
NCBI Protein Information:LIM homeobox transcription factor 1-beta; LMX-1.2; LIM/homeobox protein 1.2; LIM/homeobox protein LMX1B
UniProt Protein Name:LIM homeobox transcription factor 1-beta
UniProt Synonym Protein Names:LIM/homeobox protein 1.2; LMX-1.2; LIM/homeobox protein LMX1B
Protein Family:LIM/homeobox protein
UniProt Gene Name:LMX1B
UniProt Entry Name:LMX1B_HUMAN

*ノート: プロトコルは、各バッチ/ロットに固有です。正しい手順については、キットに含まれているプロトコルに従ってください。

使用前に、TMB基質を37°Cで少なくとも30分間平衡化します。サンプルと試薬を希釈するときは、完全に均一に混合する必要があります。各テストの標準曲線をプロットすることをお勧めします。

ステッププロトコル
1.Set standard, test sample and control (zero) wells on the pre-coatedplate respectively, and then, record their positions. It isrecommended to measure each standard and sample in duplicate. Washplate 2 times before adding standard, sample and control (zero) wells!
2.Add Sample and Biotin-detection antibody: Add 50µL of Standard, Blank or Sample per well. The blankwell is added with Sample Dilution Buffer. Immediately add 50 µL of biotin-labelled antibody workingsolution to each well. Cover with the plate sealer provided. Gently tap the plate to ensure thoroughmixing. Incubate for 45 minutes at 37°C. (Solutions are added to the bottom of micro-ELISA platewell, avoid touching plate walls and foaming).
3.Wash: Aspirate each well and wash, repeating the process three timesWash by filling each well with Wash Buffer (approximately 350µL)using a squirt bottle, multi-channel pipette, manifold dispenser orautomated washer. Complete removal of liquid at each step is essentialto good performance. After the last wash, remove any remaining WashBuffer by aspirating or decanting. Invert the plate and pat it againstthick clean absorbent paper.
4.HRP-Streptavidin Conjugate(SABC): Add 100µL of SABC workingsolution to each well. Cover with a new Plate sealer. Incubate for30minutes at 37°C.
5.Wash: Repeat the aspiration/wash process for five times.
6.TMB Substrate: Add 90µL of TMB Substrate to each well. Coverwith a new Plate sealer. Incubate for about 10-20 minutes at 37°C.Protect from light. The reaction time can be shortened or extendedaccording to the actual color change, but not more than 30minutes.When apparent gradient appeared in standard wells, you can terminatethe reaction.
7.Stop: Add 50µL of Stop Solution to each well. Color turn toyellow immediately. The adding order of stop solution should be as thesame as the substrate solution.
8.OD Measurement: Determine the optical density (OD Value) of each wellat once, using a microplate reader set to 450 nm. You should open themicroplate reader ahead, preheat the instrument, and set the testing parameters.

ELISAアッセイを実施する場合、可能な限り最良の結果を達成するためにサンプルを準備することが重要です。以下に、さまざまなサンプルタイプのサンプルを準備するための手順のリストを示します。

サンプルタイププロトコル
血清If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

プラズマCollect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
尿および脳脊髄液Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
細胞培養上清Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
細胞溶解物Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
組織ホモジネートThe preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
組織溶解物Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
母乳Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.
View AllClose

View AllClose

Related Products