Description
| Product Name: | Human/Monkey TBP (TATA-box-binding protein) ELISA Kit |
| Alias: | TATA-box-binding protein ELISA Kit, TATA sequence-binding protein ELISA Kit, TATA-binding factor ELISA Kit, TATA-box factor ELISA Kit, Transcription initiation factor TFIID TBP subunit ELISA Kit, TBP ELISA Kit, GTF2D1 ELISA Kit, TF2D ELISA Kit, TFIID ELISA Kit, QtsA-10091 ELISA Kit, QtsA-11515 ELISA Kit |
| SKU: | AEFI01101 |
| Size: | 96T |
| Species: | Human/Monkey |
| UniProt No.: | P20226 Q4R4F5 |
| Sample Type: | Serum, Plasma, Cell Culture Supernatant, cell or tissue lysate, Other liquid samples |
| Detection Method: | Sandwich ELISA, Double Antibody |
| Detection Wavelength: | OD450 |
| Reaction Duration: | 4 hours |
| Range: | 0.313-20ng/ml |
| Sensitivity: | 0.188ng/ml |
| Storage: | 2-8°C(Sealed), Don't cryopreserve. |
| Specificity: | Specifically binds with TBP, no obvious cross reaction with other analogues. |
| Component | Size (96T) | Storage |
| ELISA Microplate (Dismountable) | 8×12 | Put the rest strips into a sealed foil bag with the desiccant. Stored for 1 month at 2-8°C; Stored for 6 months at -20°C |
| Lyophilized Standard | 2 vials | Put the rest standards into a desiccant bag. Stored for 1 month at 2-8°C; Stored for 6 months at -20°C |
| Biotin-labeled Antibody (Concentrated, 100X) | 120 ul | 2-8°C (Avoid Direct Light) |
| HRP-Streptavidin Conjugate (SABC, 100X) | 120 ul | |
| TMB Substrate | 10 ml | |
| Sample Dilution Buffer | 20 ml | 2-8°C |
| Antibody Dilution Buffer | 10 ml | |
| SABC Dilution Buffer | 10 ml | |
| Stop Solution | 10 ml | |
| Wash Buffer (Concentrated, 25X) | 30 ml | |
| Plate Sealer | 5 pieces | |
| Product Description | 1 copy |
Other materials and equipment required:
- Microplate reader (wavelength: 450nm)
- 37°C incubator (CO2 incubator for cell culture is not recommended.)
- Automated plate washer or multi-channel pipette/5ml pipettor (for manual washing purpose)
- Precision single (0.5-10μL, 5-50μL, 20-200μL, 200-1000μL) and multi-channel pipette with disposable tips(Calibration is required before use.)
- Sterile tubes and Eppendorf tubes with disposable tips
- Absorbent paper and loading slot
- Deionized or distilled water
| Recovery: | Add a certain amount of TBP into the sample. Calculate the recovery by comparing the measured value with the expected amount of TBP in the sample. | |||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
| Linearity: | Dilute the sample with a certain amount of TBP at 1:2, 1:4 and 1:8 to get the recovery range. | |||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
| Stability: | Perform the stability test for the sealed kit at 37°C and 2-8°C and get relevant data. | |||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
| Precision(%): | Intra-assay Precision: samples with low, medium and high concentration are tested 20 times on the same plate. Inter-assay Precision: samples with low, medium and high concentration are tested 20 times on three different plates. | |||||||||||||||||||||||||||||||||||
|
| Step 1: | Add 100ul standard or sample into each well, seal the plate and statically incubate for 90 minutes at 37°C. |
| Washing: Wash the plate twice without immersing. | |
| Step 2: | Add 100ul biotin-antibody working solution, seal the plate and statically incubate for 60 minutes at 37°C. |
| Washing: Wash the plate three times and immerse for 1min each time. | |
| Step 3: | Add 100ul HRP-Streptavidin Conjugate (SABC) working solution, seal the plate and statically incubate for 30 minutes at 37°C. |
| Washing: Wash the plate five times and immerse for 1min each time. | |
| Step 4: | Add 90ul TMB substrate solution, seal the plate and statically incubate for 10-20 minutes at 37°C. (Accurate TMB visualization control is required.) |
| Step 5: | Add 50ul stop solution. Read at 450nm immediately and calculate. |
