Rat IL-12 (p40) ELISA Kit
- SKU:
- RTFI00899
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- E9PU71
- Sensitivity:
- 7.031pg/ml
- Range:
- 11.719-750pg/ml
- ELISA Type:
- Sandwich ELISA, Double Antibody
- Synonyms:
- IL-12 p40, IL12B, IL-12B, CLMF2, NKSF2, p40, IL-12, IL-23 p40
- Reactivity:
- Rat
Frequently bought together:
Description
| 商品名: | Rat IL-12/p40 (Interleukin 12 p40) ELISA Kit |
| 製品コード: | RTFI00899 |
| サイズ: | 96 Assays |
| 目標: | Rat IL-12/p40 |
| エイリアス: | IL-12 p40, IL12B, IL-12B, CLMF2, NKSF2, p40, IL-12, IL-23 p40 |
| 反応性: | Rat |
| 検出方法: | Sandwich ELISA, Double Antibody |
| 感度: | 7.031pg/ml |
| 範囲: | 11.719-750pg/ml |
| 保管所: | 4°C for 6 months |
| ノート: | For Research Use Only |
| 回復: | Matrices listed below were spiked with certain level of Rat IL-12/p40/p40/p40 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat IL-12/p40/p40/p40 in samples. | ||||||||||||||||
| |||||||||||||||||
| 直線性: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat IL-12/p40/p40/p40 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| Intra-Assay: | CV <8% | ||||||||||||||||
| Inter-Assay: | CV <10% |
| Uniprot: | Q5BK64 |
| UniProt Protein Function: | Function: Component of ribonuclease P, a protein complex that generates mature tRNA molecules by cleaving their 5'-ends. |
| UniProt Protein Details: | Catalytic activity: Endonucleolytic cleavage of RNA, removing 5'-extranucleotides from tRNA precursor. Subunit structure: RNase P consists of a RNA moiety and at least 8 protein subunits; POP1, RPP14, RPP20/POP7, RPP25, RPP29/POP4, RPP30, RPP38 and RPP40. Subcellular location: Nucleus › nucleolus Potential. Sequence caution: The sequence AAC24114.1 differs from that shown. Reason: Erroneous initiation. The sequence AAH17871.1 differs from that shown. Reason: Frameshift at position 327. The sequence CAH73740.1 differs from that shown. Reason: Erroneous initiation. |
| UniProt Code: | Q5BK64 |
| NCBI GenInfo Identifier: | 17389705 |
| NCBI Gene ID: | 10799 |
| NCBI Accession: | AAH17871.1 |
| UniProt Secondary Accession: | Q5BK64,Q8R1F9, Q5BK64, |
| UniProt Related Accession: | O75818 |
| Molecular Weight: | 41,834 Da |
| NCBI Full Name: | RPP40 protein |
| NCBI Synonym Full Names: | ribonuclease P/MRP 40kDa subunit |
| NCBI Official Symbol: | RPP40 |
| NCBI Official Synonym Symbols: | RNASEP1; bA428J1.3 |
| NCBI Protein Information: | ribonuclease P protein subunit p40; ribonuclease P1; RNase P subunit 1; RNaseP protein p40; ribonuclease P (40 kD); ribonuclease P 40kDa subunit; ribonuclease P, 40kD subunit |
| UniProt Protein Name: | Ribonuclease P protein subunit p40 |
| UniProt Synonym Protein Names: | RNase P subunit 1 |
| Protein Family: | Ribonuclease P protein |
| UniProt Gene Name: | RPP40 |
| UniProt Entry Name: | RPP40_HUMAN |
| ステップ | プロトコル |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37°C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
ELISAアッセイを実施する場合、可能な限り最良の結果を達成するためにサンプルを準備することが重要です。以下に、さまざまなサンプルタイプのサンプルを準備するための手順のリストを示します。
| サンプルタイプ | プロトコル |
| 血清 | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles. |
| プラズマ | Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit. |
| 尿および脳脊髄液 | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| 細胞培養上清 | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| 細胞溶解物 | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
| 組織ホモジネート | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C. |
| 組織溶解物 | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| 母乳 | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
